(28″x 48″) Flow Acrylic Walk-In Hydro Massage Tub
$3,899.00 – $4,389.00
28″x 48″ Flow Acrylic Hydro Therapy Massage Walk In Bathtub
ShowerShop Flow acrylic walk-in bathtub is sized for the average bather and comes equipped with a comfortable wide 20″ molded seat and an inward swing S-Shape acrylic door, giving you a modern aesthetic great for any bathroom. A low step-in threshold and textured slip resistant floor for easy and safe entry and exit of the tub. This walk in tub is equipped with an oversized 2″ floor drain that includes a pull up emergency chain for a fast and reliable drainage and exit. The acrylic shell is backed by a solid rustproof stainless-steel frame with adjustable leveling legs, giving you a safe, sturdy, and long-lasting walk-in bathtub. Explore available jetting or therapeutic options by clicking ‘Choose Included Features’ tabs below, or check out optional accessories under ‘Walk-in Tub Optional Features’.
Disclaimer: Includes one non-reversible end panel on faucet side, and one non-reversible extension panel on back side.
Interested in something different? Check out the rest of our bathtubs.
✔ USA Assembled & Tested
Choose Included Features
Product information
A 2″ drain with a pull up chain offers you a faster drainage time compared to the standard 1.5” drain that most of our competitors use. Typical drainage time is approximately +/-80 seconds at ideal in-home plumbing conditions. If possible, it is recommended to connect into 2″ or 3″ house drain for a faster drainage time. This gravity driven drain offers fast and reliable because it does not require an electric pump. Whereas electrical driven drains may fail due to electrical shorts or power outages.
The ShowerShop 2 Piece Fast Fill Faucet with pull out multi-function hand shower is perfect for your walk in bathtub or any bathtub where fill time matters. The fast fill 2 piece fills at a rate of up to 16 GPM (gallons per minute) based on in house plumbing conditions. If desired, the pull out hand shower can be used for shower while the bathtub is filled to stay warm. Available in a Chrome or Brushed Nickel finish.
The ShowerShop Standard walk-in tub has sixteen (16) strategically placed hydro jets in order to deliver optimal therapeutic relief. Ten (10) upper fixed jets work to provide relief for your back, hips and thighs, while six (6) lower adjustable jets massage your feet and calves.
The Hydro Massage System includes: a hydro pump with an in-line water heater, a hydro massage intensity control dial, and a strategically positioned hydro jet system for targeted and effective massaging. The in-line water heater is designed to maintain the water temperature at a constant level while bathing for maximum comfort. Lastly, the hydro massage intensity control dial allows you to adjust the strength of the water stream by controlling airflow into the hydro system.
The ShowerShop Flow also includes one (1) end panel for faucet side installation and one (1) extension panel kit for the back side fitting a 60” alcove installation. These panels cover the end of the tub to give your bathtub a completed look. Additional panels can be ordered in the case your tub will be installed to the wall as free standing.
We provide a limited lifetime warranty, of free replacement parts for the lifetime of the original customer living at the address of installation. This warranty is non-transferable to other customers or locations. Shipping costs and the labor of replacement(s) are not included.
Frequently Purchased with Walk-in Tubs
-
Bathroom Fixtures & Accessories
Deck Mount Jandon Retro Roman Faucet for Walk-In Tubs
$500.00The Jandon 5-Piece Traditional Roman Tub Faucet With Hand-held Shower has five (5) pieces: two temperature levers, a diverter lever, a mounted faucet and a pull out multi-functional hand shower. To control the temperature of the water, use the hot or cold lever. The third lever can divert the water between the mounted faucet and handshower. The fill time for this faucet will vary based on house water pressure and walk in bathtub size. The pull out hand shower can be used while the bathtub is filling, if desired.Features:
- Matching finish hand-held shower
- 80″ metal flexible hose
- High flow rate 1/4 turn ceramic cartridges
- Solid brass waterway construction
- Spout Flow Capacity: 14-16gpm
- Hand-held shower flow rate: 2.5gpm @ 80psi
- 100% pressure system tested
- Lifetime limited warranty
-
This product has multiple variants. The options may be chosen on the product pageBathroom Fixtures & AccessoriesDeck Mount Huntington Brass Faucet for Walk-In Tubs
$550.00 – $598.00The Huntington Brass 5-Piece Fast Fill Faucet Set includes a spout, pull-out hand shower, hot and cold on/off levers, and a diverter. This fast fill-faucet has a fill rate up to 18 gallons per minute based on your home plumbing conditions. The ¾” supply lines offer a higher rate of water flow compared to standard ½” lines. Available in Chrome.Note: Huntington Brass faucets do not include a water supply line. ShowerShop 2-piece and 5-piece faucets include a 5″ water supply line.Disclaimer: All ShowerShop walk-in bathtub controls and jets are in a chrome finish. Ordering faucets in different finishes will not change the chrome finish of the walk-in bathtubs. -
This product has multiple variants. The options may be chosen on the product pageBathroom Fixtures & Accessories
Tile Flange for Walk-In Tub
$69.00 – $78.00The purpose of the ShowerShop Glue-Up Tile Flange kit is to provide the perfect tile flange option for bathtubs and shower bases that lack a built-in tile flange.ShowerShop brand walk-in bathtub shells do not include an integral tile flange. The reason for this omission is our focus on maximizing interior space by minimizing the deck width to the necessary minimum. As a result, finishing tiles or wall panels over the deck should also occupy minimal space to allow for cleaning gaps between the wall and fixtures. We strongly recommend purchasing and installing ShowerShop glue-up flexible tile flange for this purpose. This tile flange is constructed from a thin, waterproof fabric membrane and is perfectly suited for this application. -
Bathroom Fixtures & Accessories
(20 1/2″W x 13″L x 3 1/2″H) Standard Shape: Bathtub Pillow and Riser for Walk-In Tubs Seat Riser 3
$190.00Material & Size:
- 20 1/2″ W x 13″ L x 3 1/2″ H
- Vinyl coated polyester
- Moisture, mold and mildew resistant
- Polyester Stuffing
- Clear Soft Plastic Suction Cups
*Available on backorder
-
This product has multiple variants. The options may be chosen on the product pageBathroom Fixtures & Accessories
(12”x 1 ¼”) Modern Polished Stainless Steel Circle Grab Bar and (20”x 1 ¼”) Dual Bent Bathroom Grab Bars
$100.00Modern Dual Bent Grab and Circle Grab Bars by ShowerShop
- Optimal Safety: Enhances safety during movements into and out of walk-in bathtubs or showers.
- Durable Construction: Made from brushed stainless steel for long-lasting use.
- Versatile Installation: Recommended for installation by the tub, toilet, in showers, and in transition areas to ensure stability and support.
- Seamless Integration: Blends seamlessly with your bathroom décor while providing essential safety features for a more secure and comfortable bathing experience.
| Door & Drain Position | Left, Right |
|---|---|
| Heated Seat & Back | Exclude, Include ($598) |